כל פעם שאני מתחיל לדבר בסקייפ ניהיה מסך כחול והמחשב עושה לעצמו ריסטרת . רציתי לדעת איך אני מאבחן מה הבעיה ? ולמה זה קורה ? ואיך אני פותר את זה שזה יפסיק ?!? יש לי וינדוס XP (המחשב חזר מפירמוט מה שעושה את זה עוד יותר מוזר ) קראתי שצריך לשים לב למספרים שרשומים במסך הכחול כידי לדעת מה הבעייה , אבל הבעייה שהמסך הכחול מופיע לשנייה ואני לא מספיק לראות כלום ! יש דרך למצוא את מספר השגיאה ?!?!

עשיתי בדיקת וירוסים , ואין שום וירוס , עשיתי בדיקת שגיאות למחשב והכל בסדר (נראה לי )

תודה רבה !!

שלום,

ראשית כל - תערוך בבקשה את כותרת הנושא, כך שתהיה אינפורמטבית וחוקית בהתאם לחוקי הפורום:

הקפידו לכתוב כותרת (נושא) עניינית לדיון שהנכם פותחים, הכותרת צריכה להכיל את השאלה הכללית שלכם או את תמצית הנושא של הדיון.

בקשר לבעיה שלך:

טיפול בריסטרטים פתאומיים ומסכים כחולים

בשביל למצוא שגיאה לבטל בוט בשגיאה מאותו מסך שמה אתה בוחר מצב בטוח.

בתמונה

שגיאה במסך כחול למטה כל המספרים שאחרי STOP ***

[attachment deleted by admin]

תעלה את קבצי ה dump האחרונים שנוצרו לפה בעזרת הלינק שמתן רשם לך, ותשנה את הכותרת לכותרת אינפורמטיבית

פתחתי את הקובץ עם התוכנה , היה רשום שכנראה הסיבה לבעיה היא בגלל קובץ vvftC322.sys .

עשיתי חיפוש בגוגל למצוא מזה הקובץ הזה ולא מצאתי ...

אם וכלו להגיד לי מה זה בדיוק תודה !

זה כל הפרטים של הקובץ מהתוכנה :

Microsoft ® Windows Debugger Version 6.11.0001.404 X86

Copyright © Microsoft Corporation. All rights reserved.

Loading Dump File [C:\WINDOWS\minidump\Mini100209-01.dmp]

Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***

****************************************************************************

* Symbol loading may be unreliable without a symbol search path. *

* Use .symfix to have the debugger choose a symbol path. *

* After setting your symbol path, use .reload to refresh symbol locations. *

****************************************************************************

Executable search path is:

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

Unable to load image ntoskrnl.exe, Win32 error 0n2

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible

Product: WinNt, suite: TerminalServer SingleUserTS

Machine Name:

Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720

Debug session time: Fri Oct 2 10:25:53.343 2009 (GMT+2)

System Uptime: 0 days 11:58:57.947

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

Unable to load image ntoskrnl.exe, Win32 error 0n2

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Loading Kernel Symbols

...............................................................

.............................................................

Loading User Symbols

Loading unloaded module list

.......................

*******************************************************************************

* *

* Bugcheck Analysis *

* *

*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 8054b51a, b387b874, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*** WARNING: Unable to verify timestamp for vvftC322.sys

*** ERROR: Module load completed but symbols could not be loaded for vvftC322.sys

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

Probably caused by : vvftC322.sys ( vvftC322+12031 )

Followup: MachineOwner

---------

וזה הניתוח היותר מעמיק :

1: kd> analyze -v

*** WARNING: Unable to verify timestamp for hal.dll

*** ERROR: Module load completed but symbols could not be loaded for hal.dll

*** WARNING: Unable to verify timestamp for kmixer.sys

*** ERROR: Module load completed but symbols could not be loaded for kmixer.sys

*** WARNING: Unable to verify timestamp for Fastfat.SYS

*** ERROR: Module load completed but symbols could not be loaded for Fastfat.SYS

*** WARNING: Unable to verify timestamp for naveng.sys

*** ERROR: Module load completed but symbols could not be loaded for naveng.sys

*** WARNING: Unable to verify timestamp for navex15.sys

*** ERROR: Module load completed but symbols could not be loaded for navex15.sys

*** WARNING: Unable to verify timestamp for HTTP.sys

*** ERROR: Module load completed but symbols could not be loaded for HTTP.sys

*** WARNING: Unable to verify timestamp for EraserUtilDrvI9.sys

*** ERROR: Module load completed but symbols could not be loaded for EraserUtilDrvI9.sys

*** WARNING: Unable to verify timestamp for gdrv.sys

*** ERROR: Module load completed but symbols could not be loaded for gdrv.sys

*** WARNING: Unable to verify timestamp for srv.sys

*** ERROR: Module load completed but symbols could not be loaded for srv.sys

*** WARNING: Unable to verify timestamp for mrxdav.sys

*** ERROR: Module load completed but symbols could not be loaded for mrxdav.sys

*** WARNING: Unable to verify timestamp for wdmaud.sys

*** ERROR: Module load completed but symbols could not be loaded for wdmaud.sys

*** WARNING: Unable to verify timestamp for SYMREDRV.SYS

*** ERROR: Module load completed but symbols could not be loaded for SYMREDRV.SYS

*** WARNING: Unable to verify timestamp for sysaudio.sys

*** ERROR: Module load completed but symbols could not be loaded for sysaudio.sys

*** WARNING: Unable to verify timestamp for ndisuio.sys

*** ERROR: Module load completed but symbols could not be loaded for ndisuio.sys

*** WARNING: Unable to verify timestamp for dump_atapi.sys

*** ERROR: Module load completed but symbols could not be loaded for dump_atapi.sys

*** WARNING: Unable to verify timestamp for eeCtrl.sys

*** ERROR: Module load completed but symbols could not be loaded for eeCtrl.sys

*** WARNING: Unable to verify timestamp for mrxsmb.sys

*** ERROR: Module load completed but symbols could not be loaded for mrxsmb.sys

*** WARNING: Unable to verify timestamp for rdbss.sys

*** ERROR: Module load completed but symbols could not be loaded for rdbss.sys

*** WARNING: Unable to verify timestamp for afd.sys

*** ERROR: Module load completed but symbols could not be loaded for afd.sys

*** WARNING: Unable to verify timestamp for netbt.sys

*** ERROR: Module load completed but symbols could not be loaded for netbt.sys

*** WARNING: Unable to verify timestamp for ipnat.sys

*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys

*** WARNING: Unable to verify timestamp for SYMTDI.SYS

*** ERROR: Module load completed but symbols could not be loaded for SYMTDI.SYS

*** WARNING: Unable to verify timestamp for tcpip.sys

*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys

*** WARNING: Unable to verify timestamp for ipsec.sys

*** ERROR: Module load completed but symbols could not be loaded for ipsec.sys

*** WARNING: Unable to verify timestamp for VMC322.sys

*** ERROR: Module load completed but symbols could not be loaded for VMC322.sys

*** WARNING: Unable to verify timestamp for Savrtpel.sys

*** ERROR: Module load completed but symbols could not be loaded for Savrtpel.sys

*** WARNING: Unable to verify timestamp for SYMEVENT.SYS

*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS

*** WARNING: Unable to verify timestamp for savrt.sys

*** ERROR: Module load completed but symbols could not be loaded for savrt.sys

*** WARNING: Unable to verify timestamp for portcls.sys

*** ERROR: Module load completed but symbols could not be loaded for portcls.sys

*** WARNING: Unable to verify timestamp for RtkHDAud.sys

*** ERROR: Module load completed but symbols could not be loaded for RtkHDAud.sys

*** WARNING: Unable to verify timestamp for update.sys

*** ERROR: Module load completed but symbols could not be loaded for update.sys

*** WARNING: Unable to verify timestamp for rasacd.sys

*** ERROR: Module load completed but symbols could not be loaded for rasacd.sys

*** WARNING: Unable to verify timestamp for rdpdr.sys

*** ERROR: Module load completed but symbols could not be loaded for rdpdr.sys

*** WARNING: Unable to verify timestamp for Cdfs.SYS

*** ERROR: Module load completed but symbols could not be loaded for Cdfs.SYS

*** WARNING: Unable to verify timestamp for Fips.SYS

*** ERROR: Module load completed but symbols could not be loaded for Fips.SYS

*** WARNING: Unable to verify timestamp for netbios.sys

*** ERROR: Module load completed but symbols could not be loaded for netbios.sys

*** WARNING: Unable to verify timestamp for wanarp.sys

*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys

*** WARNING: Unable to verify timestamp for psched.sys

*** ERROR: Module load completed but symbols could not be loaded for psched.sys

*** WARNING: Unable to verify timestamp for ndiswan.sys

*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys

*** WARNING: Unable to verify timestamp for ks.sys

*** ERROR: Module load completed but symbols could not be loaded for ks.sys

*** WARNING: Unable to verify timestamp for parport.sys

*** ERROR: Module load completed but symbols could not be loaded for parport.sys

*** WARNING: Unable to verify timestamp for Rtenicxp.sys

*** ERROR: Module load completed but symbols could not be loaded for Rtenicxp.sys

*** WARNING: Unable to verify timestamp for HDAudBus.sys

*** ERROR: Module load completed but symbols could not be loaded for HDAudBus.sys

*** WARNING: Unable to verify timestamp for USBPORT.SYS

*** ERROR: Module load completed but symbols could not be loaded for USBPORT.SYS

*** WARNING: Unable to verify timestamp for VIDEOPRT.SYS

*** ERROR: Module load completed but symbols could not be loaded for VIDEOPRT.SYS

*** WARNING: Unable to verify timestamp for nv4_mini.sys

*** ERROR: Module load completed but symbols could not be loaded for nv4_mini.sys

*** WARNING: Unable to verify timestamp for Mup.sys

*** ERROR: Module load completed but symbols could not be loaded for Mup.sys

*** WARNING: Unable to verify timestamp for NDIS.sys

*** ERROR: Module load completed but symbols could not be loaded for NDIS.sys

*** WARNING: Unable to verify timestamp for Ntfs.sys

*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys

*** WARNING: Unable to verify timestamp for KSecDD.sys

*** ERROR: Module load completed but symbols could not be loaded for KSecDD.sys

*** WARNING: Unable to verify timestamp for sr.sys

*** ERROR: Module load completed but symbols could not be loaded for sr.sys

*** WARNING: Unable to verify timestamp for fltmgr.sys

*** ERROR: Module load completed but symbols could not be loaded for fltmgr.sys

*** WARNING: Unable to verify timestamp for SCSIPORT.SYS

*** ERROR: Module load completed but symbols could not be loaded for SCSIPORT.SYS

*** WARNING: Unable to verify timestamp for atapi.sys

*** ERROR: Module load completed but symbols could not be loaded for atapi.sys

*** WARNING: Unable to verify timestamp for dmio.sys

*** ERROR: Module load completed but symbols could not be loaded for dmio.sys

*** WARNING: Unable to verify timestamp for ftdisk.sys

*** ERROR: Module load completed but symbols could not be loaded for ftdisk.sys

*** WARNING: Unable to verify timestamp for pci.sys

*** ERROR: Module load completed but symbols could not be loaded for pci.sys

*** WARNING: Unable to verify timestamp for ACPI.sys

*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys

*** WARNING: Unable to verify timestamp for d347bus.sys

*** ERROR: Module load completed but symbols could not be loaded for d347bus.sys

*** WARNING: Unable to verify timestamp for isapnp.sys

*** ERROR: Module load completed but symbols could not be loaded for isapnp.sys

*** WARNING: Unable to verify timestamp for MountMgr.sys

*** ERROR: Module load completed but symbols could not be loaded for MountMgr.sys

*** WARNING: Unable to verify timestamp for VolSnap.sys

*** ERROR: Module load completed but symbols could not be loaded for VolSnap.sys

*** WARNING: Unable to verify timestamp for disk.sys

*** ERROR: Module load completed but symbols could not be loaded for disk.sys

*** WARNING: Unable to verify timestamp for CLASSPNP.SYS

*** ERROR: Module load completed but symbols could not be loaded for CLASSPNP.SYS

*** WARNING: Unable to verify timestamp for PxHelp20.sys

*** ERROR: Module load completed but symbols could not be loaded for PxHelp20.sys

*** WARNING: Unable to verify timestamp for usbhub.sys

*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys

*** WARNING: Unable to verify timestamp for drmk.sys

*** ERROR: Module load completed but symbols could not be loaded for drmk.sys

*** WARNING: Unable to verify timestamp for usbaudio.sys

*** ERROR: Module load completed but symbols could not be loaded for usbaudio.sys

*** WARNING: Unable to verify timestamp for intelppm.sys

*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys

*** WARNING: Unable to verify timestamp for serial.sys

*** ERROR: Module load completed but symbols could not be loaded for serial.sys

*** WARNING: Unable to verify timestamp for i8042prt.sys

*** ERROR: Module load completed but symbols could not be loaded for i8042prt.sys

*** WARNING: Unable to verify timestamp for imapi.sys

*** ERROR: Module load completed but symbols could not be loaded for imapi.sys

*** WARNING: Unable to verify timestamp for cdrom.sys

*** ERROR: Module load completed but symbols could not be loaded for cdrom.sys

*** WARNING: Unable to verify timestamp for redbook.sys

*** ERROR: Module load completed but symbols could not be loaded for redbook.sys

*** WARNING: Unable to verify timestamp for rasl2tp.sys

*** ERROR: Module load completed but symbols could not be loaded for rasl2tp.sys

*** WARNING: Unable to verify timestamp for raspppoe.sys

*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys

*** WARNING: Unable to verify timestamp for raspptp.sys

*** ERROR: Module load completed but symbols could not be loaded for raspptp.sys

*** WARNING: Unable to verify timestamp for msgpc.sys

*** ERROR: Module load completed but symbols could not be loaded for msgpc.sys

*** WARNING: Unable to verify timestamp for termdd.sys

*** ERROR: Module load completed but symbols could not be loaded for termdd.sys

*** WARNING: Unable to verify timestamp for NDProxy.SYS

*** ERROR: Module load completed but symbols could not be loaded for NDProxy.SYS

*** WARNING: Unable to verify timestamp for PCIIDEX.SYS

*** ERROR: Module load completed but symbols could not be loaded for PCIIDEX.SYS

*** WARNING: Unable to verify timestamp for PartMgr.sys

*** ERROR: Module load completed but symbols could not be loaded for PartMgr.sys

*** WARNING: Unable to verify timestamp for vga.sys

*** ERROR: Module load completed but symbols could not be loaded for vga.sys

*** WARNING: Unable to verify timestamp for usbccgp.sys

*** ERROR: Module load completed but symbols could not be loaded for usbccgp.sys

*** WARNING: Unable to verify timestamp for Msfs.SYS

*** ERROR: Module load completed but symbols could not be loaded for Msfs.SYS

*** WARNING: Unable to verify timestamp for Npfs.SYS

*** ERROR: Module load completed but symbols could not be loaded for Npfs.SYS

*** WARNING: Unable to verify timestamp for watchdog.sys

*** ERROR: Module load completed but symbols could not be loaded for watchdog.sys

*** WARNING: Unable to verify timestamp for usbuhci.sys

*** ERROR: Module load completed but symbols could not be loaded for usbuhci.sys

*** WARNING: Unable to verify timestamp for usbehci.sys

*** ERROR: Module load completed but symbols could not be loaded for usbehci.sys

*** WARNING: Unable to verify timestamp for fdc.sys

*** ERROR: Module load completed but symbols could not be loaded for fdc.sys

*** WARNING: Unable to verify timestamp for mouclass.sys

*** ERROR: Module load completed but symbols could not be loaded for mouclass.sys

*** WARNING: Unable to verify timestamp for kbdclass.sys

*** ERROR: Module load completed but symbols could not be loaded for kbdclass.sys

*** WARNING: Unable to verify timestamp for TDI.SYS

*** ERROR: Module load completed but symbols could not be loaded for TDI.SYS

*** WARNING: Unable to verify timestamp for ptilink.sys

*** ERROR: Module load completed but symbols could not be loaded for ptilink.sys

*** WARNING: Unable to verify timestamp for raspti.sys

*** ERROR: Module load completed but symbols could not be loaded for raspti.sys

*** WARNING: Unable to verify timestamp for flpydisk.sys

*** ERROR: Module load completed but symbols could not be loaded for flpydisk.sys

*** WARNING: Unable to verify timestamp for BOOTVID.dll

*** ERROR: Module load completed but symbols could not be loaded for BOOTVID.dll

*** WARNING: Unable to verify timestamp for Dxapi.sys

*** ERROR: Module load completed but symbols could not be loaded for Dxapi.sys

*** WARNING: Unable to verify timestamp for serenum.sys

*** ERROR: Module load completed but symbols could not be loaded for serenum.sys

*** WARNING: Unable to verify timestamp for ndistapi.sys

*** ERROR: Module load completed but symbols could not be loaded for ndistapi.sys

*** WARNING: Unable to verify timestamp for mssmbios.sys

*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys

*** WARNING: Unable to verify timestamp for kdcom.dll

*** ERROR: Module load completed but symbols could not be loaded for kdcom.dll

*** WARNING: Unable to verify timestamp for WMILIB.SYS

*** ERROR: Module load completed but symbols could not be loaded for WMILIB.SYS

*** WARNING: Unable to verify timestamp for dmload.sys

*** ERROR: Module load completed but symbols could not be loaded for dmload.sys

*** WARNING: Unable to verify timestamp for d347prt.sys

*** ERROR: Module load completed but symbols could not be loaded for d347prt.sys

*** WARNING: Unable to verify timestamp for swenum.sys

*** ERROR: Module load completed but symbols could not be loaded for swenum.sys

*** WARNING: Unable to verify timestamp for USBD.SYS

*** ERROR: Module load completed but symbols could not be loaded for USBD.SYS

*** WARNING: Unable to verify timestamp for ParVdm.SYS

*** ERROR: Module load completed but symbols could not be loaded for ParVdm.SYS

*** WARNING: Unable to verify timestamp for Fs_Rec.SYS

*** ERROR: Module load completed but symbols could not be loaded for Fs_Rec.SYS

*** WARNING: Unable to verify timestamp for Beep.SYS

*** ERROR: Module load completed but symbols could not be loaded for Beep.SYS

*** WARNING: Unable to verify timestamp for splitter.sys

*** ERROR: Module load completed but symbols could not be loaded for splitter.sys

*** WARNING: Unable to verify timestamp for mnmdd.SYS

*** ERROR: Module load completed but symbols could not be loaded for mnmdd.SYS

*** WARNING: Unable to verify timestamp for MSPQM.sys

*** ERROR: Module load completed but symbols could not be loaded for MSPQM.sys

*** WARNING: Unable to verify timestamp for RDPCDD.sys

*** ERROR: Module load completed but symbols could not be loaded for RDPCDD.sys

*** WARNING: Unable to verify timestamp for dump_WMILIB.SYS

*** ERROR: Module load completed but symbols could not be loaded for dump_WMILIB.SYS

*** WARNING: Unable to verify timestamp for pciide.sys

*** ERROR: Module load completed but symbols could not be loaded for pciide.sys

*** WARNING: Unable to verify timestamp for audstub.sys

*** ERROR: Module load completed but symbols could not be loaded for audstub.sys

*** WARNING: Unable to verify timestamp for dxgthk.sys

*** ERROR: Module load completed but symbols could not be loaded for dxgthk.sys

*** WARNING: Unable to verify timestamp for Null.SYS

*** ERROR: Module load completed but symbols could not be loaded for Null.SYS

*** WARNING: Unable to verify timestamp for dxg.sys

*** ERROR: Module load completed but symbols could not be loaded for dxg.sys

*** WARNING: Unable to verify timestamp for nv4_disp.dll

*** ERROR: Module load completed but symbols could not be loaded for nv4_disp.dll

*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

*** WARNING: Unable to verify timestamp for ATMFD.DLL

*** ERROR: Module load completed but symbols could not be loaded for ATMFD.DLL

Couldn't resolve error at 'nalyze -v'

זה דריבר של מצלמה אינטרנט שלך.

לעדכן דריבר

וואלה !!

תודה רבה על הפתרון !!!

אני לא מוצא דרברים למסך שלי , יש לי מסך LG W2271TC עם מצלמת אינטרנט ומיקרופון מובנה . נכנסתי לאתר של LG ולא מצאתי דרייברים למסך שלי .

אם תוכלו לעזור לי למצוא את הדרברים זה יהיה עלהכיפאק !!

תודה רבה רבה !!

צצה בעיה חדשה עם קובץ csrss.exe מה הקובץ הזה אומר ? קראתי שזה סוג של טורג'ן או משהו בסגנון אני צריך למחוק אותו ?

זה האבחון של הבעיה ... תודה !!!

Microsoft ® Windows Debugger Version 6.11.0001.404 X86

Copyright © Microsoft Corporation. All rights reserved.

Loading Dump File [C:\WINDOWS\minidump\Mini100309-01.dmp]

Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***

****************************************************************************

* Symbol loading may be unreliable without a symbol search path. *

* Use .symfix to have the debugger choose a symbol path. *

* After setting your symbol path, use .reload to refresh symbol locations. *

****************************************************************************

Executable search path is:

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

Unable to load image ntoskrnl.exe, Win32 error 0n2

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible

Product: WinNt, suite: TerminalServer SingleUserTS

Machine Name:

Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720

Debug session time: Sat Oct 3 12:54:46.968 2009 (GMT+2)

System Uptime: 0 days 18:20:09.932

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

Unable to load image ntoskrnl.exe, Win32 error 0n2

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Loading Kernel Symbols

...............................................................

........................................................

Loading User Symbols

Loading unloaded module list

................................

*******************************************************************************

* *

* Bugcheck Analysis *

* *

*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, 8a0a4da0, 8a0a4f14, 805d297c}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

unable to get nt!KiCurrentEtwBufferOffset

unable to get nt!KiCurrentEtwBufferBase

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*************************************************************************

*** ***

*** ***

*** Your debugger is not using the correct symbols ***

*** ***

*** In order for this command to work properly, your symbol path ***

*** must point to .pdb files that have full type information. ***

*** ***

*** Certain .pdb files (such as the public OS symbols) do not ***

*** contain the required information. Contact the group that ***

*** provided you with these symbols if you need this command to ***

*** work. ***

*** ***

*** Type referenced: nt!_KPRCB ***

*** ***

*************************************************************************

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

*********************************************************************

* Symbols can not be loaded because symbol path is not initialized. *

* *

* The Symbol Path can be set by: *

* using the _NT_SYMBOL_PATH environment variable. *

* using the -y <symbol_path> argument when starting the debugger. *

* using .sympath and .sympath+ *

*********************************************************************

Probably caused by : csrss.exe

Followup: MachineOwner