עבור לתוכן

עזרה במסך כחול.

Featured Replies

פורסם

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x0000000a (0xfffffa9801ece8cb, 0x0000000000000002, 0x0000000000000000,

0xfffff80002d2fdbf)

*** ntoskrnl.exe - Address 0xfffff80002c82f00 base at 0xfffff80002c11000 DateStamp

0x4a5bc600

זה קרה לי פעמיים, פעם אחת בזמן הרצת פריי95 ופעם אחת בזמן OCCT. יש מצב זה בגלל זה?

תודה!

פורסם

עכשיו זה קרה בפעם השלישית, הבעיה שזה קורה בזמן שאני מריץ OCCT ופריים95. יכול להיות בגלל זה שהOC לא יציב?

פורסם

עוד אחד:

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: hal.dll

SYSTEM_SERVICE_EXCEPTION

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80002a8b1e6, 0xfffff88008a325b0,

0x0000000000000000)

*** hal.dll - Address 0xfffff80002ff4a56 base at 0xfffff80002ff0000 DateStamp

0x4a5bdf08

פורסם

ועוד אחד קיבלתי היום:

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: dxgmms1.sys

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff88003dac1d8, 0xfffff88004b91568,

0xfffff88004b90dc0)

*** dxgmms1.sys - Address 0xfffff88003dac1d8 base at 0xfffff88003d87000 DateStamp

0x4a5bc578

פורסם

עוד אחד:

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

SYSTEM_SERVICE_EXCEPTION

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

Technical Information:

*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff80002d94b9b, 0xfffff8800653dd10,

0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff80002acef00 base at 0xfffff80002a5d000 DateStamp

0x4a5bc600

מישהו יכול להסביר לי למה אני מקבל את המסכים כחולים האלה?

פורסם

בגלל האוברקלוק !!!! :kopfpatsch:

תבטל ותראה מה קורה

ואולי תעשה אוברקלוק הגיוני יותר

ארכיון

דיון זה הועבר לארכיון ולא ניתן להוסיף בו תגובות חדשות.

דיונים חדשים