פורסם 2009 באוקטובר 1616 שנים בבקשה מי שיכול לנתח את קובצי הDUMP ולהגיד לי מה הבעיה בדיוק.טמפרטורות תקינות.מתח תקין.ספק כח תקין.כרטיס מסך תקין.מעבד תקין.וזה אחרי בדיקת מעבדה.תודה לעוזריםושבת שלום.[attachment deleted by admin]
פורסם 2009 באוקטובר 1816 שנים נראה כמו בעיה בזכרונות, כמה סטיקים של זיכרון יש?אם יש שניים, תוציא אחד ותשתמש בו, אם עדיין מאתחל תשים את הזיכרון השני לבד.אם עדיין לא עובד, תריץ Memtest.
פורסם 2009 באוקטובר 1816 שנים תשים לב שהקובץ השלישי מצביע על eamon.sys שזה רכיב מNOD32.לפי הניסיון שלי, אם רוב קבצי Dump נגרמים מ-ntoskrnl.exe זה אומר שהבעיה בזיכרון למרות שלפעמים מופיעים קבצים אחרים.
פורסם 2009 באוקטובר 1816 שנים מחבר אני חושב דווקא בכיוון של לוח האם בעייתי.הרצתי MEMTES86 כל הלילה דרך דוס ונמצא זיכרונות תקינית.2 סלוטים : 1) 512 MB 2) 1024 GBלפני שפירמטתי את המחשב זה לפני שבוע בערך ויש לי ווינדוס אקס פי SP3 אז רשמתי גם בדיון ועדיין לא נפתרה לי בעיה :http://hwzone.co.il/community/index.php?topic=412438.0מה עליי לבדוק עוד ?
פורסם 2009 באוקטובר 1816 שנים יכולה להיות בעייה אי תאימות בין אחד הזכרונות ללוח אם.בדרך כלל את האי תאימות הזאת אי אפשר לאבחן באף תוכת בדיקה כולל memtest והיא יכולה לגרום למסכים כחולים לסירוגין.כמו שאמרתי תוציא זיכרון אחד ותעבוד איתו, אם נופל, תחליף בין הזכרונות.אחרי שתעשה את זה נוכל להמשיך הלאה.
פורסם 2009 באוקטובר 1916 שנים מחבר מה הכוונה שאתה אומר אי תאימות?!?!שהתדרי מהירויות שונים בזכרונות? שתיהם DDR2 ..מה להחליף בין הסלוטים כבר ניסיתי פעם ולא עזר..החלפתי הין סלוט 1 לבין 2 ועדיין היה מסך כחול.
פורסם 2009 באוקטובר 1916 שנים לא להחליף, להוציא זיכרון אחד לגמרי ולשים אותו במגירה.לבדוק אם יש מסכים כחולים.אם יש מסכים כחולים, לקחת את הזיכרון ששמת במגירה ולחבר למחשב.את הזיכרון שהיה בתוך המחשב אתה שם במגירה ובודק רק עם הזיכרון השני אם הבעיה נמשכת.
פורסם 2009 באוקטובר 1916 שנים מחבר כן אבל זה לא שיש לי ריסט כל 5 דקות פעם בכמה ימים ככה...אם אני משאיר על סלוט 1 זיכרון 1 ומריץ MEMTEST רק על כל אחד בנפרד זה מספיק טוב כדי לשלול זיכרון??
פורסם 2009 באוקטובר 1916 שנים עדיין לא מספיק כי כפי שציינתי יש מקרים שבהם MEMTEST לא מזהה בעיה ועדיין זיכרון יכול לגרום למסכים כחולים.
פורסם 2009 באוקטובר 2016 שנים מחבר תראה בפוסט הקודם שרשמתי וגם עכשיו מניתוח הקובץ הוא מפנה בעיה לIRQ18 שאצלי זה הכרטיס מסך אבל הרצתי גם אני וגם טכנאי במעדב את התוכנה 3DMARK עם הספק כח שלי ולא היו בעיות (תקיעות,נפילות או מסך כחול).איך זה יכול להיות שבתוכנה הוא מפנה לשם כל ריסט ?******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************MACHINE_CHECK_EXCEPTION (9c)A fatal Machine Check Exception has occurred.KeBugCheckEx parameters; x86 Processors If the processor has ONLY MCE feature available (For example Intel Pentium), the parameters are: 1 - Low 32 bits of P5_MC_TYPE MSR 2 - Address of MCA_EXCEPTION structure 3 - High 32 bits of P5_MC_ADDR MSR 4 - Low 32 bits of P5_MC_ADDR MSR If the processor also has MCA feature available (For example Intel Pentium Pro), the parameters are: 1 - Bank number 2 - Address of MCA_EXCEPTION structure 3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error 4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error IA64 Processors 1 - Bugcheck Type 1 - MCA_ASSERT 2 - MCA_GET_STATEINFO SAL returned an error for SAL_GET_STATEINFO while processing MCA. 3 - MCA_CLEAR_STATEINFO SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA. 4 - MCA_FATAL FW reported a fatal MCA. 5 - MCA_NONFATAL SAL reported a recoverable MCA and we don't support currently support recovery or SAL generated an MCA and then couldn't produce an error record. 0xB - INIT_ASSERT 0xC - INIT_GET_STATEINFO SAL returned an error for SAL_GET_STATEINFO while processing INIT event. 0xD - INIT_CLEAR_STATEINFO SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event. 0xE - INIT_FATAL Not used. 2 - Address of log 3 - Size of log 4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO AMD64 Processors 1 - Bank number 2 - Address of MCA_EXCEPTION structure 3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error 4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the errorArguments:Arg1: 00000004Arg2: 80546e70Arg3: b2000000Arg4: 00070f0fDebugging Details:------------------ NOTE: This is a hardware error. This error was reported by the CPU via Interrupt 18. This analysis will provide more information about the specific error. Please contact the manufacturer for additional information about this error and troubleshooting assistance. This error is documented in the following publication: - Bios and Kernel Developers Guid for AMD Athlon® 64 and AMD Opteron® Processors Bit Mask: MA Model Specific MCA O ID Other Information Error Code Error Code VV SDP ___________|____________ _______|_______ _______|______ AEUECRC| | | | LRCNVVC| | | | ^^^^^^^| | | | 6 5 4 3 2 1 3210987654321098765432109876543210987654321098765432109876543210 ---------------------------------------------------------------- 1011001000000000000000000000000000000000000001110000111100001111VAL - MCi_STATUS register is valid Indicates that the information contained within the IA32_MCi_STATUS register is valid. When this flag is set, the processor follows the rules given for the OVER flag in the IA32_MCi_STATUS register when overwriting previously valid entries. The processor sets the VAL flag and software is responsible for clearing it.UC - Error Uncorrected Indicates that the processor did not or was not able to correct the error condition. When clear, this flag indicates that the processor was able to correct the error condition.EN - Error Enabled Indicates that the error was enabled by the associated EEj bit of the IA32_MCi_CTL register.PCC - Processor Context Corrupt Indicates that the state of the processor might have been corrupted by the error condition detected and that reliable restarting of the processor may not be possible.BUSCONNERR - Bus and Interconnect Error BUS{LL}_{PP}_{RRRR}_{II}_{T}_err These errors match the format 0000 1PPT RRRR IILL Concatenated Error Code: -------------------------- _VAL_UC_EN_PCC_BUSCONNERR_30F This error code can be reported back to the manufacturer. They may be able to provide additional information based upon this error. All questions regarding STOP 0x9C should be directed to the hardware manufacturer.BUGCHECK_STR: 0x9C_AuthenticAMDCUSTOMER_CRASH_COUNT: 1DEFAULT_BUCKET_ID: DRIVER_FAULTPROCESS_NAME: pes2009.exeLAST_CONTROL_TRANSFER: from 806d58db to 804f8cc5STACK_TEXT: 80546e48 806d58db 0000009c 00000004 80546e70 nt!KeBugCheckEx+0x1b80546f74 806d0c2e 80042000 00000000 00000000 hal!HalpMcaExceptionHandler+0xdd80546f74 00000000 80042000 00000000 00000000 hal!HalpMcaExceptionHandlerWrapper+0x46STACK_COMMAND: kbSYMBOL_NAME: ANALYSIS_INCONCLUSIVEFOLLOWUP_NAME: MachineOwnerMODULE_NAME: Unknown_ModuleIMAGE_NAME: Unknown_ImageDEBUG_FLR_IMAGE_TIMESTAMP: 0FAILURE_BUCKET_ID: 0x9C_AuthenticAMD_ANALYSIS_INCONCLUSIVEBUCKET_ID: 0x9C_AuthenticAMD_ANALYSIS_INCONCLUSIVEFollowup: MachineOwner---------
ארכיון
דיון זה הועבר לארכיון ולא ניתן להוסיף בו תגובות חדשות.