פורסם 2005 ביולי 1820 שנים שלום, יש לי לוח אם: יש לי לוח ASUS P4S533-VM ודיסק קשיח: Maxtor 6Y060L0.שאני מסתכל ב- bios אני רואה: [ultra DMA mode [Disabledהאם לשנות את זה, ואם כן יש לי בחירה בין 6 אפשרויות שונות.להלן מידע מ- everest שאולי יכול לסייע:Maxtor 6Y060L0 (Y27M6Q6E) ] ATA Device Properties: Model ID Maxtor 6Y060L0 Serial Number Y27M6Q6E Revision YAR41BW0 Parameters 119150 cylinders, 16 heads, 63 sectors per track, 512 bytes per sector LBA Sectors 120103200 Buffer 2 MB (Dual Ported, Read Ahead) Multiple Sectors 16 ECC Bytes 57 Max. PIO Transfer Mode PIO 4 Max. UDMA Transfer Mode UDMA 6 (ATA-133) Active UDMA Transfer Mode UDMA 6 (ATA-133) (האם שתי השורות הללו לא אומרות למעשה ש ה- bios שלי כן מדבר udma עם ה- HD?) Unformatted Capacity 58644 MB ATA Device Features: SMART Supported Security Mode Supported Power Management Supported Advanced Power Management Supported Write Cache Supported Host Protected Area Supported Power-Up In Standby Not Supported Automatic Acoustic Management Supported 48-bit LBA Not Supported Device Configuration Overlay Supported ATA Device Physical Info: Manufacturer Maxtor Hard Disk Family DiamondMax Plus 9 Form Factor 3.5" Formatted Capacity 60 GB Disks 1 Recording Surfaces 2 Physical Dimensions 146.1 x 101.6 x 26.1 mm Max. Weight 630 g Average Rotational Latency 4.17 ms Rotational Speed 7200 RPM Interface Ultra-ATA/133 Buffer-to-Host Data Rate 133 MB/s Buffer Size 2 MB תודה.
פורסם 2005 ביולי 2120 שנים אתה חייב לשנות את המצב ל ENABLED המצב שבו הדיסק נמצא עכשיו - כך הוא לא מנצל את כל המהירות שלו - תשנה - הדיסק הוא ultra dma 6 - ata 133
ארכיון
דיון זה הועבר לארכיון ולא ניתן להוסיף בו תגובות חדשות.