פורסם 2005 ביוני 1020 שנים שלום..יש לי בעיה מוזרה מאוד.. כל פעם שאני צורב הצריבה מתחילה בסדר גמור, ולאחר מספר שניות מד הbuffer וזיכרון המטמון יורדים עד הסוף ומתקבלת ההודעה שהצריבה נכשלה, אגב זה לא משנה באיזו מהירות אני צורב ואם אני צורב CD או DVD.אותה בעיה הייתה לי גם בצורב הקודם ולאחר שנבדק בנועה מחשבים הוא נמצא תקין, כמו כן הצורב שברשותי עכשיו ה-LG נקנה אתמול ונבדק גם הוא במעבדות נועה כך שזה לא יכול להיות שהוא לא תקין. אם כך, מה הבעיה? אגבב אני משתמש ב-nero startsmart 6.אגב הנה לוג שקיבלתי עכשיו בזמן שעשיתי בדיקה וניסיתי לצרוב מספר שירים על דיסק רגיל לא DVD (אותו דבר קורה גם שצורבים DVD)TomerLevinger1A20-020E-0000-1349-1210-6697*Windows XP 5.1IA32WinAspi: -ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 Nero version: 6.3.1.18 (Nero Express)Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorderCD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 0 - 6.3.1.18 Adapter driver: <d347prt> HA 1=== Scsi-Device-Map ===DiskPeripheral : Maxtor 6E040L0 NAR6 nvidesm Port 0 ID 0 DMA: OffDiskPeripheral : WDC WD800JB-00JJC0 05.0 nvidesm Port 0 ID 1 DMA: OffCdRomPeripheral : HL-DT-STDVDRAM GSA-4163BA104 nvidesm Port 0 ID 0 DMA: OffCdRomPeripheral : LG DVD-ROM DRD8160B1.01 nvidesm Port 0 ID 1 DMA: OffCdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off=== CDRom-Device-Map ===Generic DVD-ROM E: CDRom2HL-DT-ST DVDRAM GSA-4163 F: CDRom4LG DVD-ROM DRD8160B G: CDRom1=======================AutoRun : 1Excluded drive IDs: WriteBufferSize: 74448896 (0) ByteShowDrvBufStat : 0BUFE : 0Physical memory : 511MB (523764kB)Free physical memory: 124MB (127064kB)Memory in use : 75 %Uncached PFiles: 0x0Use Static Write Speed Table: 0Use Inquiry : 1Global Bus Type: default (0)Check supported media : Disabled (0) 10.6.2005Audio CD15:27:02 #1 CDADOC -1 File Cdadoc.cpp, Line 1508 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 65536 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 05:30.43, Pause frames: 150, Filters: 0, Name: 'Aerosmith - Janie's Got A Gun.mp3'. Track 02: Length: 03:10.54, Pause frames: 150, Filters: 0, Name: 'Aerosmith - Sweet Emotion.mp3'. Track 03: Length: 03:32.04, Pause frames: 150, Filters: 0, Name: 'Aerosmith - Walk This Way.mp3'. Track 04: Length: 04:27.62, Pause frames: 150, Filters: 0, Name: 'Areosmith - Dream On.mp3'. Total size: 16:49.1315:27:02 #2 Phase 90 File dlgbrnst.cpp, Line 1845 Buffer Underrun Protection activated15:27:02 #3 Text 0 File Reader.cpp, Line 118 Reader running15:27:02 #4 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRAM GSA-4163B running15:27:02 #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process.15:27:02 #6 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using CD-R/RW media15:27:02 #7 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 75537 ( 16:49.12)15:27:02 #8 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD)15:27:02 #9 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: HL-DT-ST DVDRAM GSA-4163B; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)15:27:02 #10 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< =========================================15:27:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (Aerosmith - Janie's Got A Gun.mp3) 2 indices, index0 (150) not provided original disc pos #0 + 24793 (24793) = #24793/5:30.43 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 24793 blocks [HL-DT-ST DVDRAM GSA-4163B] 1: TRM_AUDIO_NOPRE (Aerosmith - Sweet Emotion.mp3) 2 indices, index0 (150) not provided original disc pos #0 + 14304 (14304) = #14304/3:10.54 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 14304 blocks [HL-DT-ST DVDRAM GSA-4163B] 2: TRM_AUDIO_NOPRE (Aerosmith - Walk This Way.mp3) 2 indices, index0 (150) not provided original disc pos #0 + 15904 (15904) = #15904/3:32.4 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 15904 blocks [HL-DT-ST DVDRAM GSA-4163B] 3: TRM_AUDIO_NOPRE (Areosmith - Dream On.mp3) 2 indices, index0 (150) not provided original disc pos #0 + 20087 (20087) = #20087/4:27.62 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 20087 blocks [HL-DT-ST DVDRAM GSA-4163B] --------------------------------------------------------------15:27:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 4: 1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 61060464, ISRC "" 2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 61060464 61427664 96443856, ISRC "" 3: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 96443856 96811056 135744048, ISRC "" 4: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 135744048 136111248 185284224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x01 -150 | 1 | 0 | 0x00 | 0x21 0 | 1 | 1 | 0x00 | 0x21 24793 | 2 | 0 | 0x00 | 0x21 24943 | 2 | 1 | 0x00 | 0x21 39247 | 3 | 0 | 0x00 | 0x21 39397 | 3 | 1 | 0x00 | 0x21 55301 | 4 | 0 | 0x00 | 0x21 55451 | 4 | 1 | 0x00 | 0x21 75538 | lead-out | 1 | 0x00 | 0x0115:27:02 #13 Phase 28 File dlgbrnst.cpp, Line 1845 Speed measurement started15:27:02 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #015:27:02 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #2494315:27:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #3939715:27:02 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #5545115:27:16 #18 Text 0 File WriterStatus.cpp, Line 115 <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 75538 (12712h), lenght 6750 blocks15:27:16 #19 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion15:27:16 #20 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK15:27:16 #21 Phase 29 File dlgbrnst.cpp, Line 1796 Speed measurement completed: 153.4x (23,020 KB/s)15:27:16 #22 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 16x (2,400 KB/s)15:27:16 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #015:27:16 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #2494315:27:16 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #3939715:27:16 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #5545115:27:16 #27 Text 0 File Mmc.cpp, Line 15836 StartDAO : CD-Text - On15:27:16 #28 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 15:27:27 #29 SCSI -500 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05C90000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0xFF 0xFF 0xD2 0xA9 0x00 0x00 0x1A 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 15:27:27 #30 CDR -500 File Writer.cpp, Line 304 SCSI command aborted HL-DT-ST DVDRAM GSA-4163B\H2 T015:27:32 #31 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion15:27:32 #32 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader15:27:34 #33 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK15:27:34 #34 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 16x (2,400 KB/s)15:27:34 #35 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated.15:27:34 #36 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye.Existing drivers:File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12:02:00 (Prassi/Veritas driver for win 2K)File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 16:31:48 (Adapter driver for src)Registry Keys:HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) תודה רבה רבה לעוזרים
פורסם 2005 ביוני 1020 שנים עם איזה דיסקים אתה צורב?בדקת ש DMA ON כי לפי הלוג הוא לא.איזה דרייברים של IDE התקנת?
פורסם 2005 ביוני 1020 שנים מחבר דיסקים - סמסונג ל-CD ו-ELK ל-DVDבקשר ל-DMA מהזה בכלל??? ואיך אני מפעיל את זה?ובקשר ל-IDE איך אני בודק איזה דרייבר יש לי ל-IDE?
פורסם 2005 ביוני 1020 שנים בתור התחלה תכנס ל DEVICE MANAGER ותסתכל ב IDE[attachment deleted by admin]
פורסם 2005 ביוני 1020 שנים מחבר משום מה אנלא מצליח להגיע למקום שאתה מגיעע רק לפה אני מצליח - http://img87.echo.cx/my.php?image=ggg2zg.jpgאינטגרל יש לך אולי אייסי שתוכל להמשיך לעזור לי משם?
פורסם 2005 ביוני 1020 שנים צטערת...בימים האחרונים אני עסוק בשדרוגים והרכבות. נצטרך לעשות את זה בקצרים.אולי הדרייברים של NVIDIA עושים לך בעיות.תכנס לאותו מקום ותעשה UNINSTALL ל דרייברים של ה IDE. תעשה ריסטרט ואז הווינדוס יעלה מחדש ויתקין לך את הדרייברים שלו ואת ההתקנים שיושבים על ה IDE. תעשה שוב ריסטרט ותראה מה קורה. גם בביוס יש אופציה להפעלת DMA אבל בד"כ היא מופעלת כברירת מחדל.
פורסם 2005 ביוני 1020 שנים תחלץ על מנהל התקנים.משם תמשיך כמו שאינטגרל אמר...תנסה אולי להחליף כבלים של IDE - גם של ההרד דיסק וגם של הצורב.(שים את הצורב על MASTER בערוץ שלו)נסה להתקין את הדרייברים של הלוח אם מחדש.תבדוק סקטורים פגומים בהרד דיסק(CHECK DISK).
ארכיון
דיון זה הועבר לארכיון ולא ניתן להוסיף בו תגובות חדשות.