DFI LanParty PRO875 ראשית אני רוצה להודות לחברת PCHardware על אספקת הלוח לביקורת כידוע, כיום ישנן שתי ערכות שבבים מובילות למעבדי פנטיום 4 החדשים בעלי באס של 800MHz, ערכות אלו, הקרויות 865PE ו- 875P מתהדרות במספר מאפיינים חדישים כגון תמיכה מובנית ב Dual DDR 400, Serial ATA, CSA Gigabit Lan וביצועים מצויינים, שאמורים להחליף את ביצועי ערכת השבבים 845PE.
היום נעמיד לבדיקה את אחד מהלוחות היותר מרשימים ומלאי הפיצ\'רים המבוססים על ערכת השבבים 875P, ה- DFI PRO875 ונראה מה יש לו להציע.
כאמור, לוח זה מגיע מחברת DFI, אשר למרות הותק שיש לה בתחום לוחות האם אינה כה פופולרית בקרב המשתמשים כמו חברות אחרות (ביניהן Asus, Abit, EPoX ו MSI).
כדי לשנות זאת, החליטה DFI לנקוט בשיטה אחרת ולייצר ליין של לוחות אם איכותיים שמיועדים לגיימרים הכבדים ומגיעים עם באנדל גדול ונכבד וביצועים טובים (ממש כמו ה 9CJS של Chaintech), וכך נולדה לה סדרת ה LanParty אשר את לוח הצמרת שבה אנו בודקים היום.
אם כן נפתח בנתונים של הלוח, כפי שהם מופיעים באתר חברת DFI :
CPU | Intel® Pentium® 4 Processor with Hyper-Threading Technology – 800MHz and 533MHz FSB Intel® Pentium® 4 Northwood Processor – 533MHz and 400MHz FSB Intel® Celeron® Northwood processor – 400MHz system data bus |
Chipset | Intel® 875P chipset |
Memory | Supports dual channel (128-bit wide) memory interface Each channel supports 2 DIMM sockets Supports up to 4GB system memory Supports Dynamic mode to optimize system performance Synchronous operation with processor system bus PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU (supports PAT mode). DDR333 will run at 320MHz memory frequency when used with 800MHz FSB CPU. PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU PC2100 (DDR266) with 400MHz FSB CPU Supports ECC/non-ECC DIMMs Supports unbuffered DIMMs |
Audio | 20-bit stereo full-duplex codec with independent variable sampling rate High quality differential CD input True stereo line level outputs S/PDIF-in/out interface 6-channel audio output |
Lan | Uses 82547EI Gigabit LAN CSA interface Integrated power management functions Full duplex support at both 10, 100 and 1000 Mbps Supports IEEE 802.3u auto-negotiation |
ATA Raid | Uses HighPoint 372N RAID controller RAID 0, 1, 0+1 and 1.5 Two independent IDE channels support 4 hard disk drives (ATA/33, ATA/66, ATA/100, ATA/133 or EIDE) Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6 |
PCI | Supports ATA/33, ATA/66 and ATA/100 hard drives PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) Bus mastering reduces CPU utilization during disk transfer Supports ATAPI CD-ROM, LS-120 and ZIP |
SATA RAID Function | Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface) Supports RAID 0 |
AGP | Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.) for 3D graphics applications (AGP 2x and 3.3V AGP card are not supported) Supports AGP 3.0 and AGP 2.0 spec. |
I/O Connectors | 4 USB 2.0/1.1 ports 1 RJ45 LAN port 2 DB-9 serial ports 1 DB-25 parallel port 1 mini-DIN-6 PS/2 mouse port 1 mini-DIN-6 PS/2 keyboard port 3 audio jacks: line-out, line-in and mic-in |
Internal I/O Connectors | 2 connectors for 4 additional external USB 2.0/1.1 ports 1 front audio connector for external line-out and mic-in jacks 1 connector for an external game/MIDI port 2 internal audio connectors (CD-in and AUX-in) 1 4-channel audio output connector 1 S/PDIF-in/out connector 1 connector for IrDA interface 2 RAID IDE connectors 2 Serial ATA connectors 2 IDE connectors 1 floppy connector 2 ATX power supply connectors 1 Wake-On-LAN connector 3 fan connectors for CPU fan, chassis fan and second fan |