מישהו מבין פה בארדואינו ? בעיה עם חיבור ללדים - תכנות - HWzone פורומים
עבור לתוכן
  • צור חשבון

מישהו מבין פה בארדואינו ? בעיה עם חיבור ללדים


אבירם אוחנה
 Share

Recommended Posts

היי

 

חיברתי את הארדואינו נאנו שקיבלתי 

או יותר נכון את הסטריפ לדים לרגל מספר 2

חיברתי גם את הGND מהארדואינו לסטריפ לדים 

ומהסטריפ , למקור מתח (5V )

חיברתי כמובן את הלדים גם למקור מתח של 5 

 

החץ בכוון הנכון 

 

עכשיו אני מעתיק תוכנה 

רושם לה רגל 2 במקום 7 שהיה במקור 

ורושם 30 לדים כמו שיש , במקום 60 

 

ומקבל הודעת שגיאה כזאתי , אחרי 10 נסיונות , הוא לא מצליח להעתיק את זה לארדואינו 

 

 

Arduino:1.8.13 (Windows Store 1.8.39.0) (Windows 10), לוח:"Arduino Nano, ATmega328P"

In file included from C:\Users\אבירם אוחנה\Desktop\sketch_jul03a\sketch_jul03a\sketch_jul03a.ino:1:0:
C:\Users\����� �����\Documents\Arduino\libraries\FastLED-master/FastLED.h:14:21: note: #pragma message: FastLED version 3.003.003
 #    pragma message "FastLED version 3.003.003"
                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
סקיצה משתמשת ב3634 (11%) מתוך נפח האחסון התוכנה הזמין. הנפח מקסימלי הינו 30720 בייט.
משתנים גלובלים משתמשים ב277 בייט (13%) של דינמי, משאירים 1771 בייט לאחסון משתנים מקומיים. מרב המקום הינו 2048 בייט.
אירעה שגיאה במהלך העלאת סקיצה
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x80
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x80


דו"ח זה היה יכול להיות מפורט יותר אם האופציה 
"Show verbose output during compilation"
הייתה מופעלת בתפריט 'קובץ -> העדפות'.
 

מה יכולה להיות הבעיה ?

אני לא מבין .

 

צילום מסך

 

 

 

ללא שם.png

קישור לתוכן
שתף באתרים אחרים

הצטרפ/י לדיון

בשלב זה תוכל/י להצטרף לדיון, ולאחר מכן להצטרף לקהילה שלנו. אם כבר יש לך חשבון אצלנו, אנא התחבר/י עכשיו על מנת להגיב תחת שם המשתמש שלך.
לתשומת לבך: התגובה תופיע לגולשים לאחר אישור של צוות הנהלת הפורומים.

אורח
הוסף תגובה

×   התוכן שהודבק הוא עם עיצוב.   הסר עיצוב

  Only 75 emoji are allowed.

×   הקישור שלך הוטמע אוטומטית.   הצג כקישור רגיל

×   התוכן הקודם שלך שוחזר אוטומטית.   נקה הכל

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
  • צור חדש...